JH-B1 Blister forming and automated packing machine
The JH-B1 blister forming and automatic packing machine adopts the latest high-tech design that allows the cost of the servo to be affordable, with inexpensive supplies, low operating cost, yet with a maximum cost-return ratio. The automated precision tablet/capsule download system and automated screening system allow the servo to operate round-the-clock, while manned by only one operator.
The JH-B1 servo is compatible for PTP packing of tablets, sugar-coated/membrane-coated tablets, hard capsules, and soft capsules.
| | Its feature is as follows | | 1. | The servo operates on a continuous rotation motion of a non-interrupted repetitive motion to be free of impact, noise, and runs smoothly. | | 2. | Option to incorporate row-wide perforation in tablet packing. | | 3. | Comes with Teflon plated heating board and contact heated PVC membrane to allow a lower heating temperature, optimal even heating, and stable rotation speed. | | 4. | The servo housing is built of SUS 304 stainless steel and is guaranteed to meet G.M.P. demａnd criteria. | | 5. | A diagonal trim-off method that does not create intermittent material waste to help conserve at least 6% in packaging cost. | | 6. | The status monitor prompts causes leading to servo pauses, i.e. low PVC foil, heater malfunction, etc. | | 7. | Mold adjustment and prepping guaranteed to be less than one hour, including servo mold change, cleaning and adjustment. |
| Product specification | | Cycle timing | maximum rotation speed at 40 cycles per minute. | | PVC capacity | maximum up to130mm in width and 350 micron in thickness | | Area of each blister formed | Maximum up to 115*65mm. | | Depth of draw | Standard hole depth at 12mm. |
| Dimensions | | Dimensions | 2150mm in length, 1800mm in height, 1150 in width | | Weight | 950kg | | Power rating | 220/240V, 3§, 50/60 Hz | | Power consumption | 4.2kw Air: 200L/min at 5 kg/cm |
| The servo’s main components comprised of | BLISTER PACKING MACHINE | | Equipment mount: for the mechanical transmission mechanism and pneumatic pressure transmission mechanism |  | | Packing material feeding system and material dispensing wheel | | Manual material unloading panel | | Aluminum foil feeding system | | Line cutting station | | Vibrating material unloading system/automated capsule sorting and unlading system | | Control panel and monitoring system | | PVC preheating panel | | Heat forming system (pressurized air forming) | | Heat sealing system, typeset/lot number imprint mechanism | | Complete product counter, trim-off mold, PID temperature controller | |
